GD-261B Semi-auto PMCC Flash Point Tester (Digital Display)

GD-261B Flash Point Tester can control temperature, stir sample, ignite, detect, and print out test data automatically. PurposeGD-261B Semi-auto PMCC Flash Point Tester (Digital Display) is designed and made as per the National Standard GB/T261 “Test Methods for Flash Point of Petroleum Products (Closed Cup Methods)”. It is used to determine the lowest temperature of a petroleum product sample when the mixture of sample vapor and air around the sample contacts and flashes when heated in a closed cup under stipulated conditions. The lowest temperature is the flash point of the sample.   Adopt microprocessor techniques and equipped with advanced software,  GD-261B Semi-auto PMCC Flash Point Tester can control temperature, stir sample, ignite, detect, and print out test data automatically. It has a six digits display.  

Main parameters

(I) Operation condition

1. Ambient temperature: +10°C~+30°C;

2. Relative humidity: < 80%;

3. Power supply: AC 220V±10%, 50±1Hz;

(II) Temperature measurement

1. Measurement range: ambient temperature~250°C;

2. Accuracy: 0.2%;

3. Resolution: 0.1 °C;

4. Repeatability:

 (1) Flash Point is lower than 104 °C: error is 2 °C;

 (2) Flash Point is higher than 104 °C: error is 4 °C;

(III) Basic parameters

1. Interval for flame application

 (1) Flash point is lower than 104 °C: 1 °C;

(2) Flash point is higher than 104 °C: 2 °C;

2. Temperature rising rate: as per GB/T261-83;

3. Stirring speed: 105 RPM

4. Ignition mode: by gas flame (4 mm);

5. Total power consumption: not more than 300 W;

6. Dimension:

(1) Main case: 360×110×300 (mm);

(2) Measurement case: 320×260×200 (mm);

7. Net weight: 10 kg