PMCC Flash Point Tester GD-261 Closed Cup

GD-261 PMCC Flash Point Tester is suitable to determine closed cup flash point of petroleum oils. GD-261 PMCC Flash Point Tester The PMCC Flash Point Tester is designed and made as per the National Standard of People’s Republic of China GB/T261-2008 “Test Methods for Flash Point of Petroleum Products (Pensky-Martens Closed Cup Methods)”.  The PMCC Flash Point Tester is suitable to determine closed cup flash point of petroleum products having a flash point higher than 40 °C as per GB/T261-2008. Main technical specification and parameters of the  PMCC Flash Point Tester 1. Power supply: AC 220V±10%, 50 Hz;2. Heating device:(1) The furnace is made of SiC materials; its power is 600 W;(2) Heating power is adjustable in the range of 0~600W;3. Sample temperature rising rate: 1~12°C per minute, manually controlled;4. Electric stirring device:(1) Stirring motor: 45TYZ Motor;(2) Driving device: by a soft shaft;(3) Stirring blade specification: 8×40 mm;5. Stirring speed: As per the requirement of GB/T261-2008;(1) 90~120 RPM for procedure A;(2) 250±10 RPM for procedure B;6. Standard oil cup: As per the requirement of GB/T261-2008;(1) Inner diameter: 50.7~50.8 mm;(2) Depth: 55.7~56.0 mm;(3) Depth of Marked line on the oil cup: 33.9~34.3 mm;(4) Oil sample cubage: about 70 ml;7. Ignition device (Flame application device):(1) Ignition source: Coal gas (or other civilian combustible gas);(2) Aperture of ignition device: 0.8 mm;8. Thermometer: Rod type Mercury Thermometer, as per GB/T261-2008;(1) Temperature range: -5~110°C, Each scale division is 0.5 °C;(2) Temperature range: 20~150°C, Each scale division is 1.0 °C;(3) Temperature range: 90~370°C, Each scale division is 2 °C;9. Ambient temperature: ≤35°C;10. Relative humidity: ≤85%;11. Total power consumption: not more than 650 W;